METRAVI DL-VL-01 Voltage and Current Data Logger

Product Specifications

This meter is designed and produced according to IEC61010 safety standard, and leave factory with best status after inspection.

Channel : Single-Channel input

RMS : Measure and record virtual value of voltage and leaked current of AC cycle signal. ( 100,096 data )

Accuracy : Voltage 10V~600V(40Hz ~ 1kHz)± 2% ± 1V Current 10A~200A (50/60Hz)± 2% ± 1A

Wave record : Record the wave which exceeds the set Voltage/Current ( 764 data )

RTC: Real time display, calibrated with software. MAX/MIN: maximum andminimum readinghold Data output: USB output

The Datalogger USB software is a program for collecting data

from the DATA LOGGER when it is connected to a PC or notebook computer.The data may be displayed graphically, as Excelor similar programs. The major functions are all listedin the main window.

The maximum number of data points is 100,096.

System Required: Windows 2000 or Windows XP or Vist

Minimum Hardware Required : PC or NoteBook with Pentium 90MHz or higher 32 MB RAM; At least 7 MB byte hard disk space available to install Datalogger USB software.

Recommended display resolution 1024X768 with High Color(16 bit).

Rating & Reviews

4.5

(Based On 10 Reviews)

Rating

0

0

0

0

0