Shop By Categories
.png)
.png)
.png)
Item(s) Added To Your Bag
Fluke 805 FC Vibration Meter
Click To Zoom
Fluke 805 FC Vibration Meter
Fluke 805 FC Vibration Meter
Make go or no-go maintenance decisions with confidence. The Fluke 805 FC Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration, bearing health and machine health.
Request Callback
Order In Bulk
Generate Quote
100% ORIGINAL PRODUCTS
SECURE PAYMENTS
1 YEAR WARRANTY
AUTHORIZED DISTRIBUTOR
B2B INVOICES
₹ 3,44,729
(GST inclusive price) i-
Base Value: ₹ 292143.2
-
GST: (18) % ₹ 52585.8
-
Total Value ₹ 344729
₹4,63,995.00
( - 26% OFF )
Description
Key Features
- Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
- Consistent data quality at both low and high frequency ranges
- Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
- Exportable data via USB or wirelessly, through the Fluke Connect® mobile app
- Trending in Microsoft® Excel using pre-built templates
- Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
- Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
- Get authorization to take next steps in an instant if machine health is at risk via Fluke Connect® mobile app
- Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
- Temperature measurement with Spot IR Sensor increases diagnostic capabilities
- On-board memory holds and saves up to 3,500 measurements
- External accelerometer (optional) support for hard to reach locations
- Flashlight for viewing measurement locations in dark areas
- Large screen with high resolution for easy navigation and viewing
What's in the box?
|
Rating & Reviews
Rating
GENERAL
| Battery type | AA (2) Lithium Iron Disulfide |
| Battery life | 250 measurements |
| Size (L x W x H) | 25.72 cm x 16.19 cm x 9.84 cm (10.13 in x 6.38 in x 3.875 in) |
| Weight | 1.16 kg (2.55 lb) |
| Fluke Connect® mobile app compatible* | Yes |
| Connectors | USB mini-B 7-pin, external sensor jack (SMB connector) |
TECHNICAL
| Vibration meter | |
| Low frequency range (overall measurement) | 10 Hz to 1,000 Hz |
| High frequency range (CF+ measurement) | 4,000 Hz to 20,000 Hz |
| Severity levels | Good, Satisfactory, Unsatisfactory,Unacceptable |
| Vibration limit | 50 g peak (100 g peak-peak) |
| A/D converter | 16-bit |
| Signal to noise ratio | 80 dB |
| Sampling rate | |
| Sampling rate | |
| Low frequency | 20,000 Hz |
| High frequency | 80,000 Hz |
| Real time clock backup | Coin battery |
| Sensor | |
| Sensitivity | 100 mV / g ± 10% |
| Measurement range | 0.01 g to 50 g |
| Low frequency range (overall measurement) | 10 Hz to 1,000 Hz |
| High frequency range (CF+ measurement) | 4,000 Hz to 20,000 Hz |
| Resolution | 0.01 g |
| Accuracy | At 100 Hz ± 5 % of measured value |
| Amplitude units | |
| Acceleration | g, m/sec2 |
| Velocity | in/sec, mm/sec |
| Displacement | mils, mm |
| Infrared thermometer (temperature measurement) | |
| Range | -20 °C to 200 °C (-4 °F to 392 °F) |
| Accuracy | ± 2 °C (4 °F) |
| Focal length | Fixed, at ~3.8 cm (1.5 in) |
| External sensor (optional accessory) | |
| Frequency range | 10 Hz to 1,000 Hz |
| Bias voltage (to supply power) | 20 V dc to 22 V dc |
| Bias Current (to supply power) | Maximum 5 mA |
| Firmware | |
| External interfaces | USB 2.0 (full speed) communication |
| Data capacity | Database on internal flash memory |
| Upgrade | through USB |
| Memory | Up to 3,500 measurements |
| Radiated emission | |
| Electrostatic discharge: Burst | Standard EN 61000-4-2 |
| Electromagnetic interference | Standard EN 61000-4-3 |
| RE | Standard CISPR 11, Class A |
| Firmware | |
| Operating temperature | -20 °C to 50 °C (-4 °F to 122 °F) |
| Storage temperature | -30 °C to 80 °C (-22 °F to 176 °F) |
| Operating humidity | 10 % to 95 % RH (non-condensing) |
| Operating/Storage altitude | Sea Level to 3,048 meters (10,000 feet) |
| IP rating | IP54 |
| Vibration limit | 500 g peak |
| Drop test | 1 meter |
Rating & Reviews
Rating
Similar Products
Request Callback
We will get in touch with you
Brand Products
Fluke
Fluke 101 Kit Digital Multimeter + Smart Strap
.jpg "Fluke 101 Kit Digital Multimeter + Smart Strap")
₹ 5,180
₹ 7,020
Add To Cart
.jpg "Fluke 362 Clamp Meter")
_page-0001.jpg "Fluke 362 Clamp Meter")
Enter your requirement details!
We will get in touch with you.
Get ready to measure up with Insuzo where honesty meets precision in a playground of testing and measuring fun! Dive into our collection of trusted instruments and brands, because when it comes to accuracy, we're serious about making it a blast!
-
The Office Address
305 P.P. Trade Center, Netaji Subash Place, Pitampura, Delhi - 110034
-
For Support
8920884830
-
Send Us Email
info@insuzo.com